Login back in to the server to verify.Switch_2> cfgadd ' SWITCH_B','Z_ HOSTNAME01_B' Switch_1> cfgadd 'SWITCH_A','Z_ HOSTNAME01_A' Add the zones to the fabrics on each switch.When logged in to viewexplorer page, I could not see anything named zone or zoning. So I want to know exact way to view zoning info and editing it. Switch_2> zonecreate 'Z_HOSTNAME01_B', 'HOSTNAME01_HBA_1' A new esxi connected to san switch utilizing port that was currently used by other server. Switch_1> zonecreate 'Z_HOSTNAME01_A', 'HOSTNAME01_HBA_0' Create the storage zones using the aliases on each switch.

Tips: Do a switchshow to capture the WWN before start the aliases creation. To do so, telnet to the brocade switches and login as user admin.Ĭreate aliases for the hosts HBA's on each switch

It should see the switch but not the storage device.

Plug in the FC Connector into an open port on the switch.

Members of a zone are allowed to communicate with each other, but devices are not allowed to communicate across zones. Each WWN is an 8-byte number derived from an IEEE OUI (for the first 3 bytes) and vendor-supplied information.įC Zone - Fibre Channel Zone, a partitioned subset of the fabric. WWN - World Wide Name, a unique 8-byte number identifying the HBA. If a new switch that is already configured for zoning is being added to the fabric. The storage landscape continues to modernize, and multiple choices must be made to design the right Fibre Channel architecture.

HBA - Host Bus Adapter, HBA card is the device that connects the servers to a Storage Area Networks (SAN) via Fibre Channel. This document is a high-level storage area networking (SAN ) design and best-practices gui de based on Brocade products and features, focusing on Fibre Channel SAN design. In this scenario, there is a new server come with 2 HBA card that going to attach to the SAN switches. Here are the basics to add a new device to a Brocade SAN fabric.

Brocade san switch create zones